1.0 GENERAL DESCRIPTION Model 9RV: This CO alarm is intended for protection from carbon monoxide in ordinary indoor residential areas, in recreational vehicles (RV) and in unconditioned spaces such as cabins, basements and attics. It is not intended for use in Marine applications.
2.0 PRODUCT: Primary Sensitivity Setting: Unit will alarm at 150 ppm CO within 50 minutes. Power: 9 volt alkaline Gold Peak GP 1604AU, Duracell MN 1604 Current Draw: Standby 20 micro-Amp. Alarm 60 milli-Amp. Trouble 30 milli -Amp. Operating Temperature: -40° C to +66° C (- 40° F to +150° F) Operating Humidity: 10 to 95% RH Horn (Sounder) Loudness: 85 dB @ 10 ft. (3.3 meters)
3.0 APPROVALS Listed by Underwriters Laboratories Inc to UL standard 2034 and CSA6.19-01
COSTAR® Model 12-24SIR is certified to Underwriters Laboratories standard UL2075. Each alarm carries a limited 6-year warranty from date of manufacture. Normal operating temperature range is from 4.4°C to 37.8°C (40° to 100° F), relative humidity (RH) range from 7.5% to 95%. Extreme operation temperature tested from 0°C to 52°C.
COSTAR® Model 12-24SIR is designed to be connected to security and fire systems operating at either 12 or 24 volts. These systems include a central panel.
This unit is designed to be hardwired to a 12 Volts DC source found in RVs and has a 9 volt battery for backup. 1.0 GENERAL DESCRIPTION The model 12RV-DB is designed for installation in Recreational Vehicles. Its dual source power input allows for connection to both the house battery and to the engine battery. The design is such that the alarm selects the battery with the highest voltage to draw its power from. The alarm also includes a replaceable 9 volt alkaline backup battery which will power the alarm when the coach batteries are disconnected. 2.0 PRODUCT DATA 2.1 Sensitivity Setting: Unit will alarm at 150 ppm CO within 50 minutes 2.2 Power: dual source 12 VDC nominal, operating voltage range 10-18 volts, 2.3 Backup battery: 9 volt Alkaline DURACELL MN1604, GOLD PEAK 1604AU 2.4 Current Draw Standby 20 ?a, alarm 50ma. 2.5 Wiring: 18AWG 2.6 Operating Temperature: -40 F to 150 F (-40C to 66 C) 2.7 Operating Humidity: 10-95% RH 2.8 Horn (Sounder) Loudness: 85 db @ 10 ft (3.3 meters) 3.0 APPROVALS Listed by Underwriters Laboratories to UL standard 2034 and CSA 6.19-01
SENSOR REPLACEMENT (see manual for details) The COSTAR® VC-e CO sensing element is replaceable every 3 years. Each individual sensor is factory calibrated; no field adjustments are necessary or possible except for sensor replacement. A signal indicating sensor replacement is given when necessary.
COSTAR® 24VC-e carbon monoxide detecting ventilation fan controller is designed for use where ventilation fans are needed to prevent dangerous accumulations of carbon monoxide (CO) from engine exhaust or combustion appliances. The COSTAR® 24VC-e lowers operating costs by activating the fan only when required to maintain good air quality while enhancing safety by alarming if dangerous CO conditions are detected. The COSTAR® 24VC-e features an electrochemical sensor and a microcomputer-based CO detection circuit. The microcomputer provides overall supervisory control, measures CO level and calculates CO dose. It also self-tests the internal electronic circuit and signals a fault warning if a malfunction is detected. The CO sensing element is replaceable every 3 years. Each individual sensor is factory calibrated; no field adjustments are necessary or possible except for sensor replacement. A signal indicating sensor replacement is given when necessary.